Destec Engineering | Australia
You can download our brochures

You can download pdf versions of our brochures, click here to head to our downloads page

Contact Us

Unit 1 / 29 Enterprise Crescent

Malaga, Western Australia 6090

Email: sales@destec.com.au

Tel: +61 (0) 8 9248 2688

Fax: +61 (0) 8 9248 6302

Pipe Plugs

pipe plug

Destec Engineering pipe plugs are used for blocking, flow through, bypass and line acceptance testing of pipes and drainage systems. Lightweight, multi-size, Kevlar ® reinforced pipe plugs are easy to handle and economical due to their versatility.


Plumbing Plugs
Small Sealing Pipe Plugs
Small Sealing Pipe Plugs with By-Pass
Long Plugs with 2 Stage Control

Municipal Plugs
Multi-Size Gas Bag Pipe Plugs
Man Hole Testing Plugs
Large Municipal Sealing Pipe Plugs
Oil Resistant Pipe Plugs
Large Municipal Pipe Plugs with 2" or 4" By Pass
Large Municipal Pipe Plugs with Large By Pass
High Pressure Pipe Plugs
Protective Sleeves
Egg Shaped Pipe Plugs
Pillow Shaped Pipe Plugs
New Design! Pillow Shaped Pipe Plugs

Plumbing Plugs

Small Sealing Pipe Plugs

small sealing pipe plug

All Rubber Plugs from 1½″ to 12″, 36 PSI. Made of special SBR (Styrene-butadiene rubber) rubber, these pipe plugs are ideal for testing of plumbing systems in residential and commercial buildings.

Available in multi-size versions for pipes from 2″ to 8″ in diameter. Due to high quality materials and workmanship, all Sava pipe plugs have a minimum safety factor of 3, ensuring a high level of reliability and safety.

Click here to go back to top of the page

Small Sealing Pipe Plugs with By-Pass

small sealing pipe plug with by-pass

All Rubber Pipe Plugs 2″ to 12″, 36 PSI. Made of special SBR (Styrene-butadiene rubber) rubber, these pipe plugs are ideal for testing of plumbing systems in residential and commercial buildings where smaller and shorter pipe plugs are needed.

Available in single-size or multi-size versions for pipes from 2″ to 12″ in diameter. Due to high quality materials and workmanship, all Sava pipe plugs have a minimum safety factor of 3, ensuring high level of reliability and safety.

Click here to go back to top of the page

Long Plugs with 2 Stage Control

long plug with 2 stage control

Used for blocking and testing laterals and Y joints with air or water. Long Plugs are equipped with a 3 ft. (1m) inflation hose, chain and over-size capture-disc for remote placement, and retrieval.

Plugs can be easily inserted at an angle through connections into a main pipe. Sealing of each end is controlled separately by an internal two-stage controller.

Click here to go back to top of the page

Municipal Plugs

Multi-Size Gas Bag Pipe Plugs

multi-size gas bag pipe plug

Sava Gas Plugs can be inserted through small cavities and expanded inside the pipe. Anti corrosive brass design is ideal for gas and liquid applications where spark resistant materials are required. Sava gas plugs are noted for their high resistance to backpressures, up to 15 PSI.

Sava Gas Plugs are compact and can be hot-tapped through a very small opening, into gas mains, under pressure. Bypass, repairs, section replacement and testing can be done without interruption of utility service. Sava Plugs are available with sensor or without.

Click here to go back to top of the page

Man Hole Testing Plugs

man hole testing plug

The manhole testing plug is ideal for vacuum or pressure testing of standard manholes. It is equipped with 3 eyebolts for simple vertical positioning during insertion.

Click here to go back to top of the page

Large Municipal Sealing Pipe Plugs

large municipal sealing pipe plug

These plugs are moulded of special NR-SBR rubber, reinforced with Kevlar® tire cording. All plugs are test-designed at three times their working pressure (required inflation pressure) to ensure durability and safety.

Due to their light weight and short length, Sava plugs are easy to handle even in large diameter sizes. All plugs are equipped with quick-connect couplings and nipples. Reinforcement sleeves available for heavy duty use.

Click here to go back to top of the page

Oil Resistant Pipe Plugs

oil resistant pipe plug

These pipe plugs are moulded of special NBR-CR rubber, reinforced with Kevlar® tire cording. All pipe plugs are test-designed at three times their working pressure (required inflation pressure) to ensure durability and safety.

Due to their light weight and short length, Sava plugs are easy to handle even in large diameter sizes. All plugs are equipped with quick-connect couplings and nipples.

Click here to go back to top of the page

Large Municipal Pipe Plugs with 2" or 4" By Pass

large municipal pipe plug with 2″ or 4″ by pass

These pipe plugs are made of special NR-SBR rubber, reinforced with Kevlar® tire cording. Due to their light weight and short length, Sava pipe plugs are easy to handle even in large diameter sizes.

All pipe plugs are equipped with quick-connect couplings and nipples. These pipe plugs are equipped with either a 1″, 2″ or 4″ flexible flow-through, depending on the pipe plug size. A female NPT thread allows for insertion of air test adapters for line acceptance testing.

Click here to go back to top of the page

Large Municipal Pipe Plugs with Large By Pass

large municipal pipe plug with large by pass

Sava large bypass pipe plugs are made of special ∗NR-SBR rubber, reinforced with Kevlar® tire cording.

All Sava pipe plugs are test-designed at three times their working pressure (required inflation pressure) to ensure durability and safety. Due to their light weight and short length, Sava plugs are easy to handle even in large diameter sizes.

Click here to go back to top of the page

High Pressure Pipe Plugs

high pressure pipe plug

Engineered with Kevlar® and reinforced for higher back pressures. Five multi-size ranges available for sealing pipelines when back pressures exceed the operating range of our standard lightweight multi-size sealing plugs.

Click here to go back to top of the page

Protective Sleeves

protective sleeve

These heavy-duty protective sleeves are ideally suited for rental operations by considerably extending life of the pipe plugs. They also offer additional puncture resistance protection from damage caused by sharp objects in the pipe. Sleeves are very easy to install.

Click here to go back to top of the page

Egg Shaped Pipe Plugs

egg shaped pipe plug

Three multi-size ranges available with bypass for testing and blocking or without bypass for blocking.

Click here to go back to top of the page

Pillow Shaped Pipe Plugs

pillow shaped pipe plug

Ideal for large pipes when access is limited. When deflated they can be folded up, then inserted through a standard manhole and then inflated.

Standard sizes range from 2′ up to 9′ diameter, with or without bypass for testing and flow through. Generally, a pillow shaped pipe plug can be inserted through an opening 1⁄3 the diameter of the pipe.

Click here to go back to top of the page

New Design! Pillow Shaped Pipe Plugs

new design pillow shaped pipe plug

Ideal for large pipes when access is limited. When deflated they can be folded up, then inserted through a standard manhole and then inflated. Standard multi-sizes range from 24″ up to 80″ diameter. Plugs come with or without bypass (for testing and flow through).

Special composite construction allows greater multi-size range and higher backpressure. New design plugs are 33% lighter than traditional pillow plugs. The new composite material design insures greater strength, durability and longer life.

Click here to go back to top of the page

If you are interested in more information about this particular product range
please contact sales@destec.com.au

Alternatively, you can download a comprehensive full page catalogue of our
Pipe Plugs by clicking here.

Sava Australia Pty Ltd

Sava Australia Pty Ltd is a partner company that carries professional equipment for environmental management, including sewer systems, flood control drainage systems and municipal maintenance.

Click here to visit Sava website